東南科技大學

:::
瀏覽人次: 1451

研發長簡介

研發長This is an image
黃仁清 教授
(Jen-Ching Huang) 
 
 
 
 
 
英文姓名
Jen-Ching Huang
現  任
機械系教授 兼 研究發展處 研發長
職務代理人
巫維標組長 / 顧介梅組長
電子信箱
辦公室電話
(02) 8662-5834
辦公室位置
炎黃樓A棟二樓(校門口7-11斜對面)
研究室位置
綜合大樓A-06
座 右 銘
隨時充實自己,機會屬於有準備的人
學  歷
國立台灣科技大學院機械研究所博士 
國立台灣工業技術學院機械研究所碩士 
國立台灣工業技術學院機械系學士
國立台北工專機械工程科
經  歷
東南科技大學工程學院 院長 
東南科技大學微奈米科技研究中心 主任 
東南科技大學機械系教授 
東南科技大學機械系副教授
東南技術學院機械系講師 東南工專機械系講師
研究專長
1.掃描探針顯微術(SPM)量測與應用 
2.分子動力學奈米模擬分析 
3.奈米機械性質量測分析 
4.數控工具機加工技術 
5.微奈米模具加工技術 
6.奈米壓印術 
7.機械製造
8.自動化技術
目前成果
著作:
自2008年迄今,共已發表155篇論文;包括SCI國際期刊論文42篇、EI國際期刊論文16篇、國際期刊論文2篇、國內期刊論文9篇、國際研討會論文54篇與國內研討會論文32篇。 

獲獎:
  1. 參加「2008台灣奈米影像競賽」獲得「奈米模擬影像組」第三名與佳作。
  2. 參加「台灣鍍膜科技協會年會(AMTACT2008)」獲得優等論文。
  3. 榮獲東南科技大學九十七學年度績優教師。
  4. 獲得「2009台灣奈米影像競賽」獲得「掃描式探針顯微鏡(SPM)影像組」佳作與「奈米模擬影像組」第一名。
  5. 獲得「2010全國微細製作競賽」佳作。
  6. 20100902獲中華民國防蝕工程學會「防蝕工程論文獎」。
  7. 獲得2010 International Conference on Clean Nano Process, Green Energy, Nanotechnology and Computational Mechanics (ICCGNC 2010)之壁報論文金牌獎(Gold Medal Award)。
  8. 獲得「2010台灣奈米影像競賽」「奈米模擬影像組」佳作。
  9. 獲得99年國科會補助大專校院獎勵特殊優秀人才。
  10. 獲得「2011全國微細製作競賽」佳作。
  11. 獲得「2011台灣奈米影像競賽」「SEM影像組」佳作。
  12. 獲得100年國科會補助大專校院獎勵特殊優秀人才。
  13. 獲得2012 國際創意發明競賽 (2012 IIC) 銀牌獎。
  14. 獲得「2012全國微細製作競賽」第一名。
  15. 獲得101年國科會補助大專校院獎勵特殊優秀人才。
  16. 獲得101年~103年教育部補助大學實施特殊優秀人才彈性薪資。
  17. 獲得102年台灣科技大學機械工程系傑出校友。
  18. 獲得「2013全國微細製作競賽」佳作。
  19. 獲得103年台灣科技大學工程學院傑出校友。
  20. 獲得103年科技部補助大專校院獎勵特殊優秀人才。
  21. 獲得104年度北科區產聯盟【北十八.創四方】創新創業選秀競賽入圍。
  22. 獲得104年科技部補助大專校院獎勵特殊優秀人才。
  23. 獲得「2015全國微細製作競賽」第三名與佳作。
  24. 獲得「2015台灣奈米影像暨奈米新詩創作競賽」獲得「掃描式探針顯微鏡(SPM)影像組」金牌獎與銀牌獎。
 
期刊論文:
一.國際期刊論文
  1. Jen-Ching Huang and F.J. Cheng, 2015, “The evaluation of nanotribological property of nano thin film under different environment by atomic force microscopy”, Microsystem Technologies. (SCI: 0.827) (Accepted June, 2015) (Corresponding Authors)
  2. Yung-Jin Weng, Jen-Ching Huang, Hong-Siang Lin. 2015/05, "The Development of a Multi-axis Magnetic Roller for Micro-structure Transfer Printing Processing Technology”.(SCI) International Polymer Processing.[ Accepted] (SCI:0.682)
  3. Yung-Jin Weng, Rong-Horng Chen and Jen-Ching Huang, 2015, Application of Micro Embossing Technology Integrating Nano Powder Fluid and Supercritical Fluid in Low Temperature Replication Molding, Materials Research Innovations (Accepted). (SCI:0.321)
  4. Xiao-Feng Zhao, Mu-ChunWang, Jen-Ching Huang, You Qiang, and In-Seok Yoon, "Nanomaterials and Nanodevices," The Scientific World Journal, vol. 2015, Article ID 250401, pp1-2, 2015. doi:10.1155/2015/250401. 2015.3.27
  5. Feng-Chin Tsai and Jen-Ching Huang, 2014, The Characteristic Analysis of Electroosmotic Micropump with Multistage Nano-tubes, Advanced Materials Research, Vol. 1051 (2014) pp 29-33. (EI)
  6. Feng-Chin Tsai and Jen-Ching Huang, 2014, Experiments of Electronic Water Cooling System on Different Inlet Type and with/without Vortex Fin Inside, Advanced Materials Research, Vol. 1051 (2014) pp 881-885. (EI)
  7. Jen-Ching Huang, Ho Chang, Yong-Chin You and Hui-Ti Ling, 2014, “The Study on the Ultrasonic Nanomachining of Au/Ti Thin Film by Atomic Force Microscopy”, Applied Mechanics and Materials, Vol. 627, pp 35-39. (EI) (2014. 8 or 9)
  8. Jen-Ching Huang, Yung-Jin Weng, 2014, “The Study on the Nanomachining Property and Cutting Model of Single-crystal sapphire by Atomic Force Microscopy”, Scanning, Vol. 36, 599–607 (2014)  (SCI:1.333) (Corresponding Authors) December 2014 (Published online 19 September 2014)
  9. Jen-Ching Huang and F.J. Cheng, 2014, “The Study of Nanolithography Processing on the Photoresistor Thin Film by Atomic Force Microscopy”, Advanced Materials Research, Vols. 997, pp 379-382. (EI) (2014. 7)
  10. Jen-Ching Huang and F.J. Cheng, 2014, “The Nanocutting by Rigid/Elastic Tools with Nose Radius at the Gas Environment Using Molecular Dynamics Simulations”, Applied Mechanics and Materials, Vols. 599-601, pp 507-510. (EI) (2014. 7)
  11. Jen-Ching Huang and Chung-Ming Chen, 2014, “The Fabrication of Metallic Atomic Force Microscope Probe by Electrochemical Sharpening”, Special Issue on Biological Engineering & Natural Science, The Standard International Journals, (2014) pp 12-17. May, 2014 (Corresponding Authors).
  12. Jen-Ching Huang and Fu-Jen Cheng, 2014, “The study on the Boltzmann distribution of ideal gas under gravitational field by computer simulation”, Advanced Materials Research, Vol. 939 (2014) pp 584-591. (EI) April 2014 (Corresponding Authors)
  13. Jen-Ching Huang, Ho Chang and Hui-Ti Ling, 2014, “The nanostructure fabrication on conductive diamond-like carbon thin film by nano-oxidation technique”, Advanced Materials Research, Vol. 939 (2014) pp 671-678. (EI) April 2014 (Corresponding Authors)
  14. Jen-Ching Huang, Yung-Jin Weng, Huail-Siang Liu, Feng -Chin Tsai and Fu-Jen Cheng, 2014, “The study on the ultrasound assisted atomic force microscopy base nanomachining”, Advanced Materials Research, Vol. 939 (2014) pp 684-691. (EI) April 2014 (Corresponding Authors).
  15. Jen-Ching Huang, Yung-Jin Weng, Huail-Siang Liu, 2014, “A study of the nanomachining and nanopatterning on Different Materials Using Atomic Force Microscopy”, International Journal of Materials & Product Technology, Vol. 49, No. 1, pp. 57–71 (SCI:0.691) April (Corresponding Authors)
  16. Jen-Ching Huang, Fu-Jen Cheng, Chun-Song Yang, 2014, “The Study on Young's Modulus of Multilayered Cu/Ni Multilayered Nano Thin Films by Molecular Dynamics Simulation”, Applied Mechanics and Materials, Vols. 513-517 (2014) pp 113-116 (EI) (Corresponding Authors) February, 2014  
  17. Jen-Ching Huang, Fu-Jen Cheng, 2014, “The Study on the Nanocutting by Rigid Body Tool at the Gas Environment Using Molecular Dynamics Simulations”, Applied Mechanics and Materials, Vols. 494-495 (2014) pp 400-403 (EI) (Corresponding Authors) February, 2014
  18. Jen-Ching Huang, Yung-Jin Weng. 2014, "A Discussion of the Tribological Phenomena under Minimal Load Using Molecular Dynamics", Microsystem Technologies. Vol. 20, No. 3, pp. 349–355 (SCI: 0.827) (published online Sept, 2013) (Corresponding Authors)(2014 March)
  19. Jen-Ching Huang, Yung-Jin Weng. 2014, " A Study on the Construction of Nano-oxidation Process Parameter Prediction Model by Combining a Processing Database and Multiple Regression Equation", Microsystem Technologies. Vol. 20, No. 3, pp. 367–378 (SCI: 0.827) (published online, Dec. ,2013 )  (Corresponding Authors) (2014 March)
  20. Jen-Ching Huang, Huail-Siang Liu, Cheng-Shuo Xue, Gui-Jia Zhang, Xin-Ming Zhan, 2013, “The Study on the Fabrication of Nanostructure and Nanomold by Nano-oxidation and Hydrofluoric Acid Etching on TiAlN Thin Film”, Journal of the Chinese Society of Mechanical Engineers,Vol. 34, No. 4 pp. 353-359. 1-Aug-2013 (SCI:0.548)(Corresponding Authors)
  21. Yung-Jin Weng, Jen-Ching Huang, 2013, “A Discussion on the Development of SCF-CO2 Hot Embossing Molding Technology and Replication Moldability”, Polymer-Plastics Technology and Engineering, Vol. 52, Issue 6, pp. 539-545. (SCI: 1.279). 25-April-2013
  22. Jen-Ching Huang, Yi-Chia Liao, Huail-Siang Liu, Fu-Jen Cheng, 2013, “The Study on Deposition Process and Mechanical Properties of Deposited Cu Thin Films Using Molecular Dynamics”, Advanced Materials Research, Vol. 684, pp. 37-41. (EI) April-2013 (Corresponding Authors)
  23. Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Jen-Ching Huang, Chi-Hsiao Yeh, 2013, “Mechanical properties of fluorinated DLC and Si interlayer on a Ti biomedical alloy”, Thin Solid Films, Vol.528, pp.136-142. (SCI:1.809) (2013.01)
  24. Jen-Ching Huang, 2012, “Evaluation of Tribological Behavior of Al-Co-Cr-Fe-Ni High Entropy Alloy using Molecular Dynamics Simulation”, Scanning, Vol. 34, Issue 5, pp. 325~331. (SCI:1.333) (Corresponding Authors) September / October 2012
  25. Jen-Ching Huang, Jui-Yang Wang, 2012, “The Fabrication and Preservation of Nanostructures on Silicon Wafers with a Native Oxide Layer”, Scanning, Vol. 34, Issue 5, pp. 347~356. (SCI:1.333) (Corresponding Authors) September / October 2012
  26. Jen-Ching Huang, Wei-Piao Wu, 2012, “The study on Evaluation of Hybrid Drilling Command under Deep Hole Drilling”, Advanced Materials Research, Vol. 579, pp 219-226. (EI) (Corresponding Authors)
  27. Jen-Ching Huang, Shao-Hsun Chang, Hsin-Pei Chen, 2012, “Evaluation of Microstructure and Glass Transition Temperature of Al-Cu-Cr-Fe-Ni High-Entropy Alloy by Molecular Dynamics Simulation”, Advanced Materials Research, Vol. 579, pp 398-406. (EI) (Corresponding Authors)
  28. Jen-Ching Huang, 2012, “Fabricating nanostructures through a combination of nano-oxidation and wet etching on the different surface conditions of silicon wafer”, Scanning, Vol. 34, pp. 264~270. (Corresponding Authors) July/August 2012
  29. Jen-Ching Huang, Chung-Ming Chen, 2012, “High voltage nano-oxidation in deionized water and atmospheric environments by Atomic Force Microscopy”, Scanning. Vol. 34, Issue 4, pp. 230~236. (Corresponding Authors) July/August 2012
  30. Jen-Ching Huang, Wei-Piao Wu, 2012, “The Study on Plate Cam Fabrication and On-Line Measurement by Computer Numerical Control Machine”, Advanced Science Letters, Vol.14, pp. 118~124. (SCI: 1.253) (Corresponding Authors)
  31. Jen-Ching Huang, 2012, “Fabrication of a Gecko Seta-like Structure Using Polydimethysiloxane”, International Journal of Adhesion and Adhesives, Vol.36, pp.25~31. (SCI:2.170) (Corresponding Authors).
  32. Yung-Jin Weng, Jen-Ching Huang , Hsu-Kang Liu, 2012, “Study of Gray-Scale Curved Surface Magnetic Imprinting Process for Replication of Nano/Micro-Structures Product Design”, Advanced Science Letters, Vol.15, pp.267-271. (SCI: 1.253)20120731
  33. Jen-Ching Huang, 2012, “Influence of Strain Rate on Tensile Strength and Deformation Behavior of Nano-Copper Single Crystal”, Advanced Science Letters, Vol.13, pp. 410~416. (SCI: 1.253) (Corresponding Authors)20120630
  34. Jen-Ching Huang, Wei-Piao Wu, 2012, “A Combining Instant Center Method and Custom Macro Program for Plate Cam machining by Machining Center”, Journal of the Chinese Society of Mechanical Engineers , Vol.33, No.2, pp.177~182. (SCI:.548) (Corresponding Authors)
  35. Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Chi-Hsiao Yeh, Jen-Ching Huang, 2013, “Characterization and haemocompatibility of fluorinated DLC and Si interlayer on Ti6Al4V”, Surface & Coatings Technology, Volume 231, 25 September 2013, Pages 418–422. (SCI:1.876)
  36. Chun-Mming Lin, Hsien-Lung Tsai, Chang-Lin Lee, Di-Shiang Chou, Sun-Fen Lee, Jen-Ching Huang, Jyun-wei Huang, 2012, “Influence of CO2 Laser Welding Parameters on the Microstructure, Metallurgy, and Mechanical Properties of Mg-Al Alloys”, International Journal of Minerals, Metallurgy and Materials., Vol. 19, Issue 12, pp. 1114-1120. (SCI: 0.691) (December 1, 2012)
  37. Chun-Mming Lin, Hsien-Lung Tsai, Chang-Lin Lee, Di-Shiang Chou, Jen-Ching Huang, 2012, Evolution of microstructures and properties of magnesium alloy weldments produced with CO2 laser process”, Materials Science and Engineering: A, Vol. 548, pp. 12-18. (SCI: 2.108) (30 June 2012)
  38. Jen-Ching Huang, Yung-Jin Weng, 2012, “Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-scale by Nanoindenter”, Applied Mechanics and Materials, Vols. 117-119, pp 394-397. (EI) (Corresponding Authors)
  39. Jen-Ching Huang, Chung-Ming Chen, 2012, “The Study on the Atomic Force Microscopy Base Nanoscale Electrical Discharge Machining”, Scanning, Vol. 34, Issue 3, pp. 191~199. (SCI:1.333) (Corresponding Authors) May/June 2012
  40. Jen-Ching Huang, Chia-Lin Li, Jyh-Wei Lee, 2012, “The study of nanoscratch and nanomachining on hard multilayer thin films using atomic force microscope”, Scanning, Vol. 34, Issue 1, pp. 51~59, (SCI:1.333) (Corresponding Authors) January / February 2012
  41. Jen-Ching Huang, Jyh-Wei Lee, Chia-Lin Li, 2011, “Nano-scratching and nano-machining in different environments on Cr2N/Cu multilayer thin films”, Thin Solid Films, Vol. 519 pp.4992–4996. (SCI:1.909) (Corresponding Authors) May
  42. Jen-Ching Huang, Y.-J. Weng and J.-W. Lee, 2011, “Evaluation of the Nanofabrication and Corrosion on Copper by In-situ ECAFM”, Journal of Chinese Society of Mechanical Engineers, Vol.32, No.1, pp.61~66. (SCI: 0.548) (Corresponding Authors)
  43. Jen-Ching Huang, Cheng-Yi Chiu, 2011, “The Study of Single-walled Nanotube Reinforced Epoxy Composites by Molecular Dynamics”, Polymers & Polymer Composites, Vol. 19, Nos. 4&5, pp. 377~382. (SCI:0.47) (Corresponding Authors)
  44. Yung-I Chen, Bo-Lu Lin, Yu-Chu Kuo, Jen-Ching Huang, Li-Chun Chang, Yu-Ting Lin, 2011, “Preparation and annealing study of TaNx coatings on WC-Co substrates”, Applied Surface Science, Vol. 257, Issue 15, pp.6741~6749. (SCI:1.795)
  45. Ching-Been Yang, Hsiu-Lu Chiang, Jen–Ching Huang and C-C Chien, 2011, “Analysis of Structure Fabrication on Near Field Photolithography with Experimental Verification”, Journal of Chinese Society of Mechanical Engineers, Vol. 32, No. 5, pp.371~379. (SCI, 0.548)
  46. Yung-Jin Weng, Jen-Ching Huang, T. L. Chen, 2011, “Development of an Innovative Magnetic Aided Roller Microtransfer Replica Process and a Study of Microstructure Array Replication”, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science. Vol. 225, No. 11, pp.2749-2758. (SCI:0.615)
  47. Jen-Ching Huang, Chin-Lin Tsai and Ampere A. Tseng, 2010, “The influence of the bias type, doping condition and pattern geometry on AFM tip-induced local oxidation”, Journal of the Chinese Institute of Engineers, Vol. 33, No. 1, pp. 55-61. (Corresponding Authors)(SCI:0.219)
  48. Ampere A. Tseng, Jun-ichi Shirakashi, Shyankay Jou, Jen-Ching Huang, and T. P. Chen, 2010, “Scratch properties of nickel thin films using atomic force microscopy”, J. Vac. Sci. Technol. B 28„1, pp. 202-210.(SCI: 1.460)
  49. Jen-Ching Huang, Yung-Jin Weng, Yung-Chun Weng, Yi-Feng Chan, H. K. Liu, 2010, “Effects of Electrolyte Formulas on Electrochemical Polish Planarization of Pure Copper”, Key Engineering Materials, Vols. 447-448 (2010) pp 159-163. (EI) (Corresponding Authors)
  50. Yung-Jin Weng, Jen-Ching Huang, Yung-Chun Weng, Sen Yeu Yang, Yong-Cheng Wong, Hsu-Kang Liu, 2010, “A Study on Application of Making Porous Micro-Structural Aluminum Oxide Template by Anodic Aluminum Oxide Processing Technology in Cell Reproduction ”, Key Engineering Materials, Vols. 447-448 (2010) pp 356-360. (EI)
  51. Ching-Been Yang, Hsiu-Lu Chiang, Jen–Ching Huang, 2010, “Study on Advanced Nano-Scale Near field photolithography”, Scanning, Vol. 32, Issue 6, p.p. 351–360.(SCI:1.333)
  52. Yueh-Chien Lee, Sheng-Yao Hu, Walter Water, Kwong-Kau Tiong, Zhe-Chuan Feng, Yen-Ting Chen, Jen-Ching Huang, Jyh-Wei Lee, Chia-Chih Huang, Jyi-Lai Shen, Mou-Hong Cheng, 2009,”Rapid thermal annealing effects on the structural and optical properties of ZnO films deposited on Si substrates”, Journal of Luminescence Vol. 129, Issue 2, p.p. 148-152.  (SCI:1.847). (Feb. 2009)
  53. J. C. Huang, Y.J. Weng, S.Y. Yang, Y.C. Weng, and J. Y. Wang, 2009, “Fabricating Nanostructure by Atomic Force Microscopy”, Japanese Journal of Applied Physics, Vol. 48, pp095001-1~095001-5. (Corresponding Authors) (SCI:1.138) (2009.9.24)
  54. Zone-Ching Lin, Jen-Ching Huang, Chun-hui Yeh, 2009, “Error analysis and regression mode of the V-grooved sample in the Atomic Force Microscope simulation measurement mode by the molecular mechanics”, Scanning, Vol. 31, Issue 4, p.p. 147 - 159. (Nov. 2009) (SCI:1.256)
  55. S. Y. Hu, Y. C. Lee, J. W. Lee, J.C. Huang, J. L. Shen and W. Water, 2008,” The structural and optical properties of ZnO/Si thin films by RTA treatments”, Applied Surface Science, Vol. 254 pp.1578-1582. (SCI:1.161) 2008/1/15
  56. Zone-Ching Lin and Jen-Ching Huang, 2008,” The study of estimation method of cutting force for Conical Tool under Nanoscale Depth of Cut by Molecular Dynamics”, Nanotechnology Vol.19 , pp115701-1~115701-13 (SCI:3.137).
  57. Zone-Ching Lin and Jen-Ching Huang, 2008, “The influence of different cutting speeds on the cutting force and strain-stress behaviors of single crystal copper during nano-scale orthogonal cutting”, Journal of Materials Processing Technology, Vol. 201, Issues 1-3, 26 (May 2008), pp. 477-482. (SCI:1.420).
  58. Zone-Ching Lin, Jen-Ching Huang and Yen-Chieh Chao, 2008,” A Study of Deformation and Stress-Strain Distribution of Nano-scale Rod Under Bending Load by Molecular Dynamics and FEM”, Journal of the Chinese Society of Mechanical Engineers, Vol.29, No. 1 pp.1-10. (SCI: 0.548)
  59. Zone-Ching Lin, Jen-Ching Huang and Yen-Chieh Chao, 2008,” The Study of Deformation and Stress-Strain Distribution of Nano-scale Thin Sheet Copper under the Biaxial Tensile Loads by Using Molecular Dynamics and FEM Technique”, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Vol. 222, No. 6 pp.1097-1107. (SCI:0.416) (June,2008)
  60. Y.J. Weng, Y.C Weng, S.Y. Yang, J.C. Huang, H.S. Fang and J.L. Wong, 2008, “A Study of an Innovative Technology for Manufacturing Optical Waveguides Based on Vacuum-Assisted Micromolding”, Polymer-Plastics Technology and Engineering, Vol. 47, Issue 11, p.p. 1170-1173. (SCI:0.420) (November 2008)
  61. Zone-Ching Lin, Zhen-Da Chen and Jen-Ching Huang, 2007,” The Establishment of Cutting Force Model and the Study of Stress-Strain Distribution in Nano-scale Copper Material Orthogonal Cutting”, International Journal of Advanced Manufacturing Technology, Vol. 33, No.5-6, pp.425-435. (SCI:1.128) (June)
  62. Zone-Ching Lin, Jen-Ching Huang and Bo-Jhan Zeng, 2007,”The Analysis on the offset error of cross-section contour by using the simulated measurement model of atomic force microscopy”, Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 1, pp.23-33. (SCI, 0.548)
  63. Ship-Peng Lo, Yeou-Yih Lin and Jen-Ching Huang, 2007,” Analysis of Retaining Ring using Finite Element Simulation in Chemical Mechanical Polishing Process”, International Journal of Advanced Manufacturing Technology, Vol. 34, No.5-6, pp.547-555. (SCI:1.128) September, 2007.
  64. Zone-Ching Lin and Jen-Ching Huang, Yeau-Ren Jeng, 2007, ”3D Nano-scale Cutting Model for Nickel Material”, Journal of Materials Processing Technology, Volumes 192-193, 1 October 2007, Pages 27-36  (SCI:0.615)
  65. Zone-Ching Lin and Jen-Ching Huang, 2004,”A nano-orthogonal cutting model based on a modified molecular dynamics technique”, Nanotechnology, 15, 510-519. (SCI:3.137)
  66. Zone-Ching Lin and Jen-Ching Huang, 2004,” A study on rigid body boundary layer interface force model for stress calculation and stress-strain behaviour of nanoscale uniaxial tension”, Nanotechnology, 15 ,1509–1518. (SCI:3.137)
  67. Jyh-Wei Lee, Jen-Ching Huang, Jenq-Gong Duh, 2004, “Nano mechanical properties evaluation of R.F. magnetron sputtered chromium nitride thin film”, Tamkang Journal of Science and Engineering, No.4, Vol.7, pp.237-240. (EI)
  68. Zone Ching Lin and Jen Ching Huang, 2000, “The Fixture Planning of Modular Fixture for Measurement”, IIE Transcation on Design and Manufacturing, Volume 32, Number 4, pp. 345-359. (EI)
  69. Zone Ching Lin and Jen Ching Huang, 1997,“The Application of the Simulated Annealing Method and Heuristic Algorithms in the Selection of Fixture Elements “, International Journal of Advanced Manufacturing Technology, Volume 13, Number 3, pp191- 205 (SCI:0.39)
  70. Zone Ching Lin and Jen Ching Huang, 1997, August, “The Application of Neural Networks in Fixture Planning of Pattern Classification “ , Journal of Intelligent Manufacturing , Volume 8 , Number 4 , pp307-322. (SCI: 0.286)
二.國內期刊論文
  1. 巫維標、黃仁清, 2014, “油壓機械之油壓缸格蘭內切槽加工技術”, 智慧自動化產業期刊, No.9, pp.51-58. 2014/9
  2. 巫維標、黃仁清、黃亦祥, 2013, “中型油壓機械之壓座台基準平面加工技術”, 智慧自動化產業期刊, No.6, pp.2-11. 2013/9
  3. 巫維標、黃仁清, 2012, “PCB印刷電路板壓合加熱板定位溝槽之加工技術”, 自動化科技大展-產學合作技術報告期刊 pp.76-79.
  4. 黃仁清、巫維標, 2010, "應用觀念圖像於數值控制工具機教學上之研究", 東南學報第35期, pp65-74. (2010/7)
  5. 黃仁清、詹益峰、陳銘震, 2010, "以純銅進行電解拋光平坦化之研究", 東南學報第35期, pp55-64. (2010/7)
  6. 王玫、黃仁清, 2009, “視覺藝術統整課程之行動研究:以關懷教育出發之議題設計”,萬竅-中華通識教育學刊,第10期, pp.51-84.(2009/11/1)
  7. 巫維標、黃仁清, 2009, “龍門式CNC加工機側銑頭(RAH)尺寸精度誤差補正技術” ,台灣製造工程與自動化科技協會產學合作成果專刊, pp71 ~ 74, 98年8月。
  8. 黃仁清, 2009,” 不同固定端形式之扶手型單壁奈米碳管楊氏係數探討”, 台灣奈米會刊(Taiwan nano newsletter), No.16, pp.56-67, 98年4月.
  9. 郭裕竹,李志偉,張麗君,陳永逸,王朝正,黃仁清, 2009, “以液態原子力顯微鏡即時觀察合金薄膜剝除行為之研究”, 防蝕工程, Vol.23, No. 1,pp.59-66. (2009 年3 月)
  10. 李志偉,黃仁清,李朝聖,張永鵬,康淵,2007,單晶銅於奈米壓入之不連續應變現象, 先進工程期刊.Vol. 2, No. 2, pp.101-104.
  11. 黃仁清, 2007,銅在奈米等級之機械性質探討, 東南學報第31期. pp41-54.
  12. 李志偉, 陳芃孜, 陳弘凱, 杜正恭, 黃仁清, 2005, "以電化學原子力顯微鏡進行420不銹鋼於氯化鈉水溶液之即時腐蝕行為研究",防蝕工程, 第19卷第3期, pp.415-424 (2005,9).
  13. 黃仁清、巫維標, 2005, "應用巨指令於平板凸輪加工與線上測量之研究", 東南學報第29期, pp265-274.
  14. 巫維標、黃仁清, 2005, "超大型平面元件之銑削路徑與銑削參數對真平度影響之探討", 東南學報第29期, pp255-264.
  15. 巫維標、黃仁清, 2005, "超大型平面之銑削加工技術探討-以大型油壓機械之基準面元件為例", 東南學報第28期,pp233-242.
  16. 黃仁清、李志偉、許良瑋, 2005, "應用電化學原子力顯微鏡即時量測銅材料在純水與外加偏壓下奈米級表面形貌變化之研究",東南學報第28期, pp223-232.
  17. 黃仁清、李志修,2005,”結合RV-M1機械手與接觸式量測探頭於平面量測之可行性研究”, 機電整合 ,82期,6月號,pp.165-174。
  18. 黃仁清、李志偉、蔡世鴻、許嘉倫、鄭雲涵,2005,”SK3碳鋼在水中的即時微觀氧化現象探討”,機電整合,79,3月號, pp149-153,2005。
  19. 黃仁清,郭訪璇,李勝全,傅啟舜, 2004,”結合Visual Basic與PLC於小型自動倉儲系統設計與製作之研究”,機械技術,229,3月號,pp133~140。
  20. 黃仁清、李志偉, 2004, "原子力顯微鏡量測技術研究", 東南學報,第26期, pp41~52.
  21. 黃仁清,九十二年二月,” 分子動力學應用探討”,東南學報,第二十五期, pp137~146。
  22. 林榮慶,黃仁清,九十一年十二月,”奈米科技與自動化”,機械月刊,329期,pp26~32。
  23. 黃仁清,九十一年一月,”數值控制工具機NC程式教學上之研究”,東南學報,第二十四期 , pp49~55.
  24. 黃仁清,九十年五月,”游標卡尺之游標差動原理設計公式之研究”,機械技術,195期,pp196~198.
  25. 巫維標,黃仁清,九十年三月,”應用巨指令於迴轉型從動件之圓柱凸輪加工研究”,機械技術,193期 , pp162~167.
  26. 黃仁清,八十九年十二月,”結合光通訊器於AGV派車單元之研究”,機械技術,190期,pp114~119.
  27. 黃仁清,巫維標,八十九年十二月,”多段參數式鑽削指令之發展與加工行為之研究”,模具技術資訊,No.69,pp30~34.
  28. 黃仁清, 林士博,八十九年十一月,”以綜合加工中心基於平板凸輪加工之新方式”,機械技術,189期,pp168~172.
  29. 黃仁清,林士博,徐建勳,蔡銘勳,八十九年一月,”以數控工具機之巨指令為基礎進行三層龍珠加工之研究”,機械技術,179期,pp66~71.
  30. 黃仁清,巫維標,八十八年十二月,”應用綜合加工中心機於逆向工程之大型曲面量測”,東南學報,第二十二期,p73~81.
  31. 黃仁清,林士博,徐建勳,八十八年十一月,”電腦數值控制工具機加工製程之研究”,模具技術資訊,No.56,pp28~35.
  32. 黃仁清,八十七年十二月,”應用灰色關聯分析於塑膠射出成型製程規劃”,東南學報,第二十一期,pp69~77.
  33. 黃錦鐘,黃仁清,八十七年九月,”超硬合金胚件不良品原因之探討”,亞太模具科技月刊, p51 ~ 57.
  34. 黃仁清,林榮慶,八十六年十二月,”應用模組化夾具於CMM之夾持規劃”,東南學報,第二十期,pp65-88 .
  35. 林榮慶 , 黃仁清,八十五年一月,”量測用模組化夾具之夾持規劃概要” , 自動化協會季刊 , pp31-39.
 
研討會論文:
一.國際研討會論文
  1. Jen-Ching Huang Feng-Chin Tsai and Pei-Shiang Liao, 2015, “Study on the flexure hinges shape design of the uniaxial of nanopositioning stage using ANSYS”, International Conference on Mechanical and Automation Engineering (MAEE2015), May30-31, 2015, Hong Kong.
  2. Feng-Chin Tsai, Jen-Ching Huang, 2014, “The Characteristic Analysis of Electro-osmotic Micro Pump With Multistage Nano-tubes”, 2014 International Conference on Green Materials and Environmental Engineering (GMEE2014), September 21-22, 2014, Hong Kong.
  3. Feng-Chin Tsai, Jen-Ching Huang, 2014, “Experiments of electronic water cooling system on different inlet type and with/without vortex fin inside”, 2014 International Conference on Green Materials and Environmental Engineering (GMEE2014), September 21-22, 2014, Hong Kong.
  4. Jen-Ching Huang, Ho Chang, Yong-Chin You and Hui-Ti Ling, 2014, “The Study on the Ultrasonic Nanomachining of Au/Ti Thin Film by Atomic Force Microscopy”, 2014 2nd Asia Conference on Mechanical and Materials Engineering (ACMME 2014), Taipei, Taiwan, July 28-29, 2014.
  5. Jen-Ching Huang and F.J. Cheng, 2014, “The Study of Nanolithography Processing on the Photoresistor Thin Film by Atomic Force Microscopy”, 2014 3rd International Conference on Chemical Engineering, Metallurgical Engineering and Metallic Materials (CMMM 2014), Gui Lin, China, June 20-21, 2014.
  6. Jen-Ching Huang and F.J. Cheng, 2014, “The Nanocutting by Rigid/Elastic Tools with Nose Radius at the Gas Environment Using Molecular Dynamics Simulations”, 2014 International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM 2014), Gui Lin, China, June 19-20, 2014.
  7. Jen-Ching Huang and Chung-Ming Chen, 2014, “The Study on the Sharpening and Re-sharpening Innovative Process for Metallic Atomic Force Microscope Probe”, 2014 International Symposium on Fundamental and Applied Sciences (ISFAS), March 28-30th, Tokyo, Japan. (Conference Proceedings on International Symposium on Fundamental and Applied Sciences, p.p.1440-1448).
  8. Jen-Ching Huang, Fu-Jen Cheng, Chun-Song Yang, 2013, “The Study on Young’s Modulus of Cu/Ni Multilayered Nano Thin Films by Molecular Dynamics Simulation”, 2013 3rd International Conference on Materials Science and Engineering Application (ICMSEA 2013), December 14-15 2013, Beijing, China.
  9. Jen-Ching Huang, Fu-Jen Cheng, 2013, “The Study on the Nanocutting by Rigid Body Tool at the Gas Environment Using Molecular Dynamics Simulations”, 2013 3rd International Conference on Materials Science and Engineering Application (ICMSEA 2013), December 14-15 2013, Beijing, China.
  10. Jen-Ching Huang, Yung-Jin Weng, Huail-Siang Liu, Feng -Chin Tsai and Fu-Jen Cheng, 2013, “The study on the ultrasound assisted atomic force microscopy base nanomachining”, 16th International Conference on “Advances in Materials and Processing Technologies (AMPT 2013), 22-26 Sept, Taipei, Taiwan.
  11. Jen-Ching Huang, Wei-Piao Wu, Zhi-Wei Du, Kun-Ling Wu and Feng -Chin Tsai, 2013, “The study on the large area flat plane by using electro-rheological fluid polishing” , 16th International Conference on “Advances in Materials and Processing Technologies (AMPT 2013), 22-26 Sept, Taipei, Taiwan.
  12. Jen-Ching Huang, Ho Chang and Hui-Ti Ling, 2013, “The nanostructure fabrication on conductive diamond-like carbon thin film by nano-oxidation technique” , 16th International Conference on “Advances in Materials and Processing Technologies (AMPT 2013),22-26 Sept, Taipei, Taiwan.
  13. Jen-Ching Huang and Fu-Jen Cheng, 2013, “The study on the Boltzmann distribution of ideal gas under gravitational field by computer simulation”, 16th International Conference on “Advances in Materials and Processing Technologies (AMPT 2013), 22-26 Sept, Taipei, Taiwan.
  14. Jen-Ching Huang, 2013, “The Study on the Nanocutting by Rigid Body Tool and Elastic Body Tool Using Molecular Dynamics Simulations”, The 2013 International Conference of Computer Science and Engineering (ICCSE 2013), 3-5 July, London, UK.
  15. Shu-Ching Chang, Chih-Hao Chang, Yueh-Chien Lee, Jen-Ching Huang, Sheng-Yao Hu, 2012, “Surface morphology studies of InGaN epilayers deposited by metalorganic chemical vapor deposition”, 2012 International Symposium of Nano Science and Technology, 8-9 November 2012, Tainan, Taiwan.
  16. Jen-Ching Huang, Huail-Siang Liu, 2012, “Investigation of Ar Incident Energy Effects and Substrate Temperature on Residual Stress of Cu Thin Film in Ion Assisted Deposition”, 7th Asia-Pacific International Symposium on the Basics and Applications of Plasma Technology (APSPT-7), April 14-16, 2012, Taipei, Taiwan. (Corresponding Authors)
  17. Jen-Ching Huang, Wei-Piao Wu, 2012, “The study on Evaluation of Hybrid Drilling Command under Deep Hole Drilling”, 2012 International Conference on Advanced Manufacturing (ICAM2012), March 4~8, 2012, Yilan, Taiwan. (Corresponding Authors)
  18. Jen-Ching Huang, Hsin-Pei Chen, Huail-Siang Liu, Cheng-Shuo Xue, Gui-Jia Zhang, Xin-Ming Zhan, 2012, “The Study on the Fabrication of Nanostructure and Nanomold by Nano-oxidation and Hydrofluoric Acid Etching on TiAlN Thin Film”, 2012 International Conference on Advanced Manufacturing (ICAM2012), March 4~8, 2012, Yilan, Taiwan. (Corresponding Authors)
  19. Jen-Ching Huang, Shao-Hsun Chang, Hsin-Pei Chen, 2012, “Evaluation of Microstructure and Glass Transition Temperature of Al-Cu-Cr-Fe-Ni High-Entropy Alloy by Molecular Dynamics Simulation”, 2012 International Conference on Advanced Manufacturing (ICAM2012), March 4~8, 2012, Yilan, Taiwan. (Corresponding Authors)
  20. Jen-Ching Huang, Yung-Jin Weng, Huail-Siang Liu, 2012, “A study of the nanomachining and nanopatterning on Different Materials Using Atomic Force Microscopy”, 2012 AMEE Workshop on Nanoelectronics and Optoelectronics (IWNO 2012), January 18~ 19, 2012, Hong Kong. (Corresponding Authors)
  21. Jen-Ching Huang, Yi-Chia Liao, Huail-Siang Liu, 2012, “The Study on Deposition Process and Mechanical Properties of Deposited Cu Thin Films Using Molecular Dynamics”, 2012 AMEE Workshop on Nanoelectronics and Optoelectronics (IWNO 2012), January 18~ 19, 2012, Hong Kong. (Corresponding Authors)
  22. Jen-Ching Huang, 2011, “Influence of Strain Rate on Tensile Strength and Deformation Behavior of Nano-Copper Single Crystal”, The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011) (December 20-22, Guangzhou, China) (Corresponding Authors)
  23. Jen-Ching Huang, Wei-Piao Wu, 2011, “The Study on Plate Cam Fabrication and On-line Measurement by Computer Numerical Control Machine”, The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011) (December 20-22, Guangzhou, China) (Corresponding Authors)
  24. Yung-Jin Weng , Jen-Ching Huang , Hsu-Kang Liu, 2011, “Study of Gray-Scale Curved Surface Magnetic Imprinting Process for Replication of Nano/Micro-Structures Product Design”, The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011) (December 20-22, Guangzhou, China)
  25. Jen-Ching Huang, Y.-J. Weng, 2011, “Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-scale by Nanoindenter”, 2011 International Conference on Applied Mechanics, Materials and Manufacturing, (November 18-20, Shenzhen, China). (Corresponding Authors)
  26. Chu-Kuang Su, Chih-Hong Cheng, Jyh-Wei Lee, Hsin-Pei Chen, Jen-Ching Huang, “The Cyclic Oxidation Resistance Evaluation of Cr-Based Thin Films on Tool Steels”, 38th International conference on metallurgical coatings and thin films (2011 Proceeding of ICMCTF 2011conference) (May 2 - 6, 2011, San Diego, California, USA).
  27. Jyh-Wei Lee, Chi-Tsan Lin, Meng-Ko Wu, Jen-Ching Huang, “Evaluation of Microstructures and Mechanical Properties of Niobium and Vanadium Carbide Coated H11 Tool Steels”, 38th International conference on metallurgical coatings and thin films (2011 Proceeding of ICMCTF 2011conference) (May 2 - 6, 2011, San Diego, California, USA).
  28. Chih-Hong Cheng, Jyh-Wei Lee, Jen-Ching Huang, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, “Microstructure and Mechanical Properties Evaluation of Pulsed DC Magnetron Sputtered Cr-B and Cr-B-N Films”, 38th International conference on metallurgical coatings and thin films (2011 Proceeding of ICMCTF 2011conference) (May 2 - 6, 2011, San Diego, California, USA).
  29. Meng-Ko Wu, Jyh-Wei Lee, Jen-Ching Huang, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, “The Influence of Bilayer Period and Thickness Ratio on the Mechanical and Tribological Properties of CrSiN/TiAlN Multilayer Coatings”, 38th International conference on metallurgical coatings and thin films (2011 Proceeding of ICMCTF 2011conference) (May 2 - 6, 2011, San Diego, California, USA).
  30. Jen-Ching Huang, Yi-Chia Liao, “Evaluation of Mechanical Properties in Cu Thin Films under Various Substrate Conditions by Molecular Dynamics Simulation”, 38th International conference on metallurgical coatings and thin films (2011 Proceeding of ICMCTF 2011conference) (May 2 - 6, 2011, San Diego, California, USA). (Corresponding Authors)
  31. Jen-Ching Huang, Yi-Chia Liao, “The Study on the Mechanical Properties of Perfect Lattice and Sputtering of Al/Cu Multilayer Thin Film by Molecular Dynamics Simulation”, 38th International conference on metallurgical coatings and thin films (2011 Proceeding of ICMCTF 2011 conference) (May 2 - 6, 2011, San Diego, California, USA). (Corresponding Authors)
  32. Jen-Ching Huang, Wei - Piao Wu, “A Combining Instant Center Method and Custom Macro Program for Plate Cam machining by Machining Center”, International Conference on Manufacturing and Engineering Systems (ICMES 2010), (December 16- 18, 2010, Southern Taiwan University, Tainan, Taiwan). (Corresponding Authors)
  33. M. K. Wu , B. C. Huang, C. H. Cheng,C. K. Su, J. C. Huang, J.-W. Lee, S. P. Chen, “Microstructure, mechanical and anticorrosion properties evaluation of CrSiN/CrN multilayered coatings”, 2010 International Conference on Clean Nano Process, Green Energy, Nanotechnology and Computational Mechanics (ICCGNC 2010), December 8, Taipei, Taiwan.
  34. Chu-Kuang Su, Jyh-Wei Lee, Jen-Ching Huang, Hsin-Pei Chen, “The influences of various electrochemical parameters on preparing TiO2  nanotube in tetrabutyl ammonium fluoride”, 2010 International Conference on Clean Nano Process, Green Energy, Nanotechnology and Computational Mechanics (ICCGNC 2010), December 8, Taipei, Taiwan.
  35. Jen-Ching Huang and Yi-Chia Liao, “The Study on Model Establishment and Mechanical Property Evaluation of Nanocomposite Material by Molecular Dynamic Simulation”, 2010 International Conference on Clean Nano Process, Green Energy, Nanotechnology and Computational Mechanics (ICCGNC 2010), December 8, Taipei, Taiwan. (Corresponding Authors)
  36. Jen-Ching Huang, Chia-Lin Li, Jyh-Wei Lee, Yi-Chia Liao, “The study of nano-scratch and nano-machining in different environment on Cr2N/Cu multilayer thin films”, The 5th International Conference on Technological Advances of Thin Films & Surface Coatings (ThinFilms2010), (July 11- 14, 2010, Harbin, China). (Corresponding Authors)
  37. Jen-Ching Huang, Cheng-Yi Chiu, Yi-Chia Liao, “The Study of Single-walled Nanotube Reinforced Epoxy Composites by Molecular Dynamics”, The 1st International Conference on Advanced Polymer Matrix Composites  (Compo2010), (July 11- 14, 2010, Harbin, China).
  38. Jen-Ching Huang, Yung-Jin Weng, Yung-Chun Weng, Yi-Feng Chan, H. K. Liu, “Effects of Electrolyte Formulas on Electrochemical Polish Planarization of Pure Copper”, ICOPE2010 and 13th ICPE International Conference On Precision Engineering, Singapore, 28 – 30 July 2010 (EI). (Corresponding Authors)
  39. Yung-Jin Weng, Jen-Ching Huang, Yung-Chun Weng, Sen Yeu Yang, Yong-Cheng Wong, Hsu-Kang Liu, 2010, “A Study on Application of Making Porous Micro-Structural Aluminum Oxide Template by Anodic Aluminum Oxide Processing Technology in Cell Reproduction ”, ICOPE2010 and 13th ICPE International Conference On Precision Engineering, Singapore, 28 – 30 July 2010 (EI).
  40. Ching-Been Yang, Hsiu-Lu Chiang, Jen–Ching Huang and C-C Chien, 2009, “Analysis of Structure Fabrication on Near Field Photolithography with Experimental Verification”, International Conference on Manufacturing and Engineering Systems (MES 2009), p.p. 539-546 (December 17-19, 2009, National Formosa University, Taiwan).
  41. Jen-Ching Huang, Y.-J. Weng, J.-W. Lee, Y.-C. Weng, H.-K. Liu, Y.-C. Liao, and H.-S. Chou, 2009, “Evaluation of the Nanofabrication and Corrosion on Copper by In-situ ECAFM”, International Conference on Manufacturing and Engineering Systems (MES 2009), p.p. 242-247 (December 17-19, 2009, National Formosa University, Taiwan). (Corresponding Authors)
  42. Jen-Ching Huang and Chung-Ming Chen, 2009, “The Study on Fabrication of Nanoscale Tip of Metallic Probe for Atomic Force Microscopy”, International Conference on Manufacturing and Engineering Systems (MES 2009), p.p. 236-241 (December 17-19, 2009, National Formosa University, Taiwan). (Corresponding Authors)
  43. Jen-Ching Huang and J. Y. Wang, 2009, “The Study on Fabrication of Polydimethysiloxane (PDMS) Nanostructure Mold”, International Conference on Manufacturing and Engineering Systems (MES 2009), p.p. 230-235 (December 17-19, 2009, National Formosa University, Taiwan). (Corresponding Authors)
  44. Jen-Ching Huang, Chun-Chieh Cho, Min-Chien Chih, and Yi-Chia Liao, 2009, “The Study of Nano Tape Fabrication by Innovative Process”, International Conference on Manufacturing and Engineering Systems (MES 2009), p.p. 196-201 (December 17-19, 2009, National Formosa University, Taiwan). (Corresponding Authors)
  45. T. H. Wang, Y. Ding, C.-S. Tu, J.-C. Huang, J. T. Tsai, P. S. Chen, W. C. Yang, C.-C. Cho, and F. Lin, 2009, “Fabrication and Characterization of Titanium Nitride Thin Film”, International Thin Films Conference (TACT 2009), B067-P, p141 (December 14-16, 2009, Taipei, Taiwan).
  46. Jen Ching Huang, Yi-Chia Liao, Hui-Shan Chou, 2009, “Evaluation of tribological behavior of Al/Ni multilayered thin films by molecular dynamics simulations”, International Thin Films Conference (TACT 2009), D095-O, p141 (December 14-16, 2009, Taipei, Taiwan). (Corresponding Authors)
  47. Jen Ching Huang, Sha-Shun Chang, Hui-Shan Chou, Yi-Chia Liao, 2009, “Tribological Behavior of High Entropy Alloy Thin Film Using Molecular Dynamics Simulation”, International Thin Films Conference (TACT 2009), D096-P, p269 (December 14-16, 2009, Taipei, Taiwan). (Corresponding Authors)
  48. Yung-Jin Weng, Yung Chun Weng, Jen-Ching Huang, Yong Cheng Wong, Sen-Yeu Yang and Hsu Kang Liu, 2009, “Fabrication of Microlens Arrays by Using Nano-Particle Fluid Imprinting Technology”, 2009 International Conference on Applied Physics and Mathematics (ICAPM 2009), Singapore, May 16-17, 2009.(EI)
  49. H.H. Lin, C.C. Chou, J. C. Huang, J.W. Lee, Y.C. Chang, Y.B. Lin, 2009, “In Situ AFM Investigation on Tribo-Corrosion of CrSiN Film Adherent Tool Steel”, 36th International conference on metallurgical coatings and thin films (2009 Proceeding of ICMCTF 2009 conference) (April 27- May 1, 2009, San Diego, California, USA).
  50. Jen Ching Huang, Chun-Chieh Cho, 2009, “Mechanical Properties Characterization of Multilayered Nano Thin Films by Atomistic Simulations”, 36th International conference on metallurgical coatings and thin films (2009 Proceeding of ICMCTF 2009 conference) (April 27- May 1, 2009, San Diego, California, USA) , 計畫編號 NSC 97-2221-E-236-006. (Corresponding Authors)
  51. Jen Ching Huang, Chun-Chieh Cho, 2009, “Nanotribology of Multilayered Nano Thin Films by Molecular Dynamics Simulations”, 36th International conference on metallurgical coatings and thin films (2009 Proceeding of ICMCTF 2009 conference) (April 27- May 1, 2009, San Diego, California, USA), 計畫編號 NSC 97-2221-E-236-006. (Corresponding Authors)
  52. Jen Ching Huang, Chin-Lin Tsai, Ampere A. Tseng, Che-Yi Yeh and Shyankay Jou, 2008, “The Study of Nanooxidation Pattern on Si Substrate using Atomic Force Microscopy”, 2008 International Workshop on Tip-Based Nanofabrication (TBN2008), P-16, (October 19-21, 2008, Taipei, Taiwan). (Corresponding Authors)
  53. P. C. Tsai, J. Y. Chiang, Y. F. Hwang, J. C. Huang, Jyh-Wei Lee, 2008, "Mechanical Properties Evaluation of Titanium-Containing Diamond-Like Carbon Films Deposited by Cathodic Arc Plasma", 2008 Proceeding of ICMCTF 2008 conference, (April 27- May 2, 2008, San Diego, California, USA)
  54. Jyh-Wei Lee, Chih-Ming Chen, Jen-Ching Huang, Li-Chun Chang, 2008, "Deposition Process Analysis of Chromium Nitride Thin Films Using Taguchi Experimental Design Method" , 2008 Proceeding of ICMCTF 2008 conference, (April 27 - May 2, 2008, San Diego, California, USA), 計畫編號 NSC 96-2221-E-236-008.
  55. S-Y.Yang, Y-J.Weng, Y-C.Weng, J.-L.Weng, J.-C.Huang and J.-W.Lee,2007,”A study of nano-indention detection and deformation mode construction using su-8 microstructure devices produced with nano-imprint technology”, 2007 INTERNATIONAL SYMPOSIUM ON NANO SCIENCE AND TECHNOLOGY, Tainan, TAIWAN, 8-9 November 2007 ,pp377-378.
  56. S-Y.Yang, Y-J.Weng, Y-C.Weng, J.-L.Weng, J.-C.Huang and J.-W.Lee,2007,” A study of an innovative technology for manufacturing optical waveguides based on vacuum assisted micro molding”, 2007 INTERNATIONAL SYMPOSIUM ON NANO SCIENCE AND TECHNOLOGY, Tainan, TAIWAN, 8-9 November 2007,pp327-328.
  57. Zone-Ching Lin, Jen-Ching Huang, 2007, “The influence of different cutting speeds on the cutting force and strain-stress behaviors of single crystal copper during nano-scale orthogonal cutting”, Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT2007), pp. 1036-1045, Daejeon, KOREA, October 7-11, 2007.
  58. Zone-Ching Lin, Jen-Ching Huang, Chun-Hui Yeh, 2007, “The Error Analysis of Cross-section Curve with Contact Mode Atomic Force Microscopy Simulation Measurement by Using Trapezoidal Cantilever Based on Molecular Mechanics”, Proceeding of the 35th International Manufacturing Automation and Systems Technology Applications Design Organisation and Management Research (MATADOR) Conference, Taipei, Taiwan, 20070718-20070720. pp.265-270.(EI)
  59. Jyh-Wei Lee, Chao-Sheng Lee, Min-Chou Chen, Jen-Ching Huang, Yang Kang, 2006, ”The Phenomenon of Strain Burst and Pile-up in Nanoindentation of the Single Crystal Copper,” Proceedings of IJTC2006, STLE/ASME International Joint Tribology Conference, San Antonio, TX, USA , October 22-25, 2006, pp. 1-5. (EI).
  60. Zone-Ching Lin and Jen-Ching Huang, Yeau-Ren Jeng, 2006, ”3D Nano-scale Cutting Model for Nickel Material”, 7th Asia Pacific Conference on Materials Processing (APCMP), pp189-197, 4 - 6 December, Singapore.
  61. Zone-Ching Lin and Jen-Ching Huang, 2006,” Molecular Dynamics Combining with Finite Element Deformation Model for Conical Tool in 3D Nano-scale Cutting”, The Second International Symposium on Micro & Nano Technology (ISMNT-2), pp 333-336,Hsinchu, Taiwan.
  62. Kun-Nan Chen and Jen-Ching Huang, 2005, “Analysis of Tip Effects on the Dynamic Characteristics of V-shaped Atomic Force Microscope Probes,” Proceedings of the 2005 International Conference on MEMS, NANO, and Smart Systems (ICMENS 2005), pp. 65-68, July 24~27, 2005, Banff, Canada.(EI).
  63. Zone-Ching Lin and Jen-Ching Huang, 2005,”Molecular Dynamics Combining with Finite Element Deformation Model for Nano-scale Orthogonal Cutting”, 8th CIRP International Workshop on Modeling of Machining Operations, Chemnitz, Germany, pp453-460.(EI)
  64. Jyh-Wei Lee, Hung-Kai Chen, Peng-Tzu Chen, Jenq-Gong Duh and Jen-Ching Huang, 2003”In situ investigation of corrosion phenomena in SUS420 by the electrochemical atomic force microscope", International Symposium on Nano Science and Technology, Tainan, Taiwan, 4-7 November, pp.214-215.
二.國內研討會論文
  1. 黃仁清、廖培翔, 2015, “單軸向精密定位平台幾何外形之研究”, 2015機光電技術與應用研討會, 聖約翰科技大學, 新北市, 104年6月3日, p.p. 11-15.
  2. 黃仁清、葉俊宏, 2015, “地絞鏈功能探討與創新設計之規劃”, 2015機光電技術與應用研討會, 聖約翰科技大學, 新北市, 104年6月3日, p.p. 5-10.
  3. 黃仁清、張合、游永欽、凌惠迪, 2014, “以超音波掃描探針顯微術於聚碳酸酯之微奈米尺度加工研究” ,中國機械工程學會第三十一屆全國學術研討會, 逢甲大學, 台中市, 103年12月6日~7日.
  4. 黃仁清, 王志瑋, 林仲緯, 鄭仕桓, 楊萬吉, 邱敏, 2014, “免外部電力式電磁式煞車裝置之設計與製作”,第十九屆車輛工程學術研討會, 桃園創新技術學院機械工程系,台灣中壢, 103年11月14日.
  5. 黃仁清, 劉懷翔, 凌惠迪, 2013, “鋯基金屬玻璃之超音波輔助奈米加工之研究” ,中國機械工程學會第三十屆全國學術研討會, 宜蘭大學, 宜蘭市, 102年12月6日~7日.
  6. 黃仁清, 王志瑋, 林仲緯, 鄭仕桓, 楊萬吉, 邱敏, 2013, “鋁-鐵盤電磁煞車裝置之製作與研究” ,中國機械工程學會第三十屆全國學術研討會, 宜蘭大學, 宜蘭市, 102年12月6日~7日.
  7. 黃仁清, 張嘉玶、高阡彤、凌惠迪、張合, 2013, “以奈米氧化術於類鑽碳薄膜進行微奈米結構製作之研究”, 2013全國精密製造研討會論文集-SME 2013, 11月22日,台北科技大學. 台北市
  8. 黃仁清, 劉懷翔, 崔虎峻, 侯信良, 林崴宸, 2011, “脆性材料奈米加工行為之研究”, 2011第十五屆奈米工程暨微系統技術研討會, 9月, 台北科技大學. 2011.09.06 ~ 07台北市
  9. 黃仁清, 薛丞碩,張桂嘉,詹欣銘, 2011, “以奈米氧化術在氮化鈦鋁薄膜進行奈米結構製作與翻模之探討”,2011精密機械與製造科技研討會,5月,屏東.
  10. 黃仁清, 薛丞碩,張桂嘉,詹欣銘,劉懷翔, 2011, “以奈米加工進行奈米結構製作與翻製之探討”,2011精密機械與製造科技研討會,5月,屏東.
  11. 林有鎰,黃仁清,邱進東,李文喜, “以新型二維原子模型有限元素模式模擬化學機械研磨製程鑽石研磨粒之切削行為” , 2010 全國精密製造研討會(SME 2010), 2010/11/6台北.
  12. 黃仁清, “結合熱傳機制與分子動力學於奈米加工之研究” ,2010機械固力學門成果發表會,台北科技大學, 台北市, 99年12月10日~11日.
  13. 黃仁清, 黎佳霖, 李志偉, 廖沂嘉, 2010, “氮化鉻-銅奈米多層薄膜之奈米刮痕與加工行為之研究” ,中國機械工程學會第二十七屆全國學術研討會,台北科技大學, 台北市, 99年12月10日~11日.
  14. 黃仁清, 王瑞揚, 2010, “結合奈米氧化術與濕蝕刻技術於微奈米模具製作之研究” ,中國機械工程學會第二十七屆全國學術研討會, 台北科技大學, 台北市, 99年12月10日~11日.
  15. 黃仁清, 王瑞揚, 2010,” 結合加工資料庫與多元迴歸方程式建構奈米氧化術製程參數預測模式之研究” ,中國機械工程學會第二十七屆全國學術研討會, 台北科技大學, 台北市, 99年12月10日~11日.
  16. 王玫、黃仁清, 2010, “Blog融入學習社群知識共構之教學實踐-以「視覺美學-文化意象」課程為例”, 2010通識教育學術研討暨論文發表會, pp.41-64,崑山科技大學通識教育中心,台南縣,(2010/03/05)
  17. 黃仁清, 廖沂嘉, 2009, “應用原子力顯微鏡於奈米圖案加工之研究”, 2009年奈米技術與材料研討會, 彰化縣大葉大學, 98年12月11日.
  18. 黃仁清, 張少薰, 2009, “以分子動力學模擬探討高熵合金的微結構與楊氏係數”, 2009年奈米技術與材料研討會, 彰化縣大葉大學, 98年12月11日.
  19. 黃仁清,王瑞揚, 2009, “矽晶片之原生氧化層對奈米氧化術與濕蝕刻製程的影響”, 2009年奈米技術與材料研討會, 彰化縣大葉大學, 98年12月11日.
  20. 黃仁清, 2009,“結合奈米氧化術與奈米壓印技術於奈米結構製作之研究”,國科會機械固力學門九十七年度計畫成果發表會, 台南市成功大學, 98年11月21日.
  21. 巫維標,黃仁清,楊慶彬,陳健忠, 2009,” 混合式鑽削型態鑽孔加工技術之建構與研究” ,中國機械工程學會第二十六屆全國學術研討會, 台南市成功大學,98年11月20日~21日.
  22. 楊慶彬,江新祿,黃仁清,陳健忠, 2009,” 近場光學微影奈米級結構加工模擬模型之研究” ,中國機械工程學會第二十六屆全國學術研討會, 台南市成功大學,98年11月20日~21日.
  23. 黃仁清, 陳宗民, 2009,” 以電化學法製作不銹鋼材質之原子力顯微鏡探針之研究” ,中國機械工程學會第二十六屆全國學術研討會, 台南市成功大學,98年11月20日~21日.
  24. 黃仁清, 邱正益, 2009,” 以分子動力學探討單層奈米碳管強化環氧樹脂複合材料之研究” ,中國機械工程學會第二十六屆全國學術研討會, 台南市成功大學,98年11月20日~21日.
  25. 黃仁清,王瑞揚,翁永進,楊申語, 2009,” 結合奈米氧化術與濕蝕刻技術於奈米結構製作之研究” ,中國機械工程學會第二十六屆全國學術研討會, 台南市成功大學,98年11月20日~21日.
  26. 廖沂嘉,周惠珊,黃仁清,李志偉,”以電化學原子力顯微鏡即時觀察氮化銅鉻薄膜腐蝕行為之研究”, 2008台灣鍍膜科技協會年會(AMTACT2008),彰化縣明道大學,97年12月5日~6日.
  27. 黃仁清,翁晟傑,李志偉,”以摩擦力顯微術評估氮化銅鉻薄膜磨潤行為之研究” 2008台灣鍍膜科技協會年會(AMTACT2008),彰化縣明道大學,97年12月5日~6日.
  28. 林有鎰,黃仁清,陳釘煙, 邱進東, 2008,” 銅奈米薄膜拉伸之分子動力學耦合有限元素法之研究”,中華民國力學學會第三十二屆全國力學會議.
  29. 黃仁清,吳沂洋,蕭宇軒,陳勁甫, 2008,”以分子動力學估測單壁奈米碳管之楊氏係數”,中華民國力學學會第三十二屆全國力學會議,嘉義縣中正大學, 97年11月28日~29日.
  30. 楊程光、鄭宜峰、黃仁清、顏炳華、黃豐元,2008,”純水中的電解現象分析與大電流放電加工特性研究”,中國機械工程學會第二十五屆全國學術研討會, 彰化縣大葉大學,97年11月21日~22日.
  31. 黃仁清,廖沂嘉,周惠珊, 2008,”應用電化學原子力顯微鏡於奈米級電化學輔助加工之研究”,中國機械工程學會第二十五屆全國學術研討會, 彰化縣大葉大學,97年11月21日~22日.
  32. 黃仁清,吳沂洋,蕭宇軒,陳勁甫, 2008,”以分子動力學探討極小負荷下之磨潤現象”,中國機械工程學會第二十五屆全國學術研討會, 彰化縣大葉大學,97年11月21日~22日.
  33. 黃仁清,呂學諭,王瑞揚,許崇佑,涂志豪,李春桔,2007,”應用原子力顯微鏡於奈米點之製作”, 2007年能源與光電薄膜科技研討會暨國科會專題計畫研究成果發表會,第三屆兩岸奈米與鍍膜科技研討會,p158. 2007年12月21日(五)~12月22日,大同大學.
  34. 黃仁清,王瑞揚,呂學諭,許崇佑,涂志豪,李春桔,2007,”應用原子力顯微鏡於奈米結構與奈米圖案製作之研究”,2007年奈米技術與材料研討會, 12月7日,大葉大學,p6.
  35. 康淵、鄭沛華、李志偉、黃仁清、黃志綱、蕭景仁、蔣東堯、李俊昱,2007,”光碟片鍍硬面之奈米刮痕及奈米磨耗性質測試”,中國機械工程學會第二十四屆全國學術研討會, p.p. 5209-5213。
  36. 康淵、鄭沛華、李志偉、黃仁清、黃志綱、蕭景仁、蔣東堯、李俊昱,2007,”光碟片鍍硬面之奈米壓痕性質之抗刮測試”,中國機械工程學會第二十四屆全國學術研討會, p.p. 5214-5218。
  37. 康淵、黃志綱、沈炳臣、李志偉、黃仁清、李朝聖、李俊昱、張永鵬,2007,”銅材料奈米機械性質之分析”,中國機械工程學會第二十四屆全國學術研討會p.p. 2905-2909。
  38. 黃志綱、李志偉、黃仁清、康淵、李俊昱、沈炳臣、張永鵬、張育銓,2007,”銅薄膜奈米機械性質之測試”,中國機械工程學會第二十四屆全國學術研討會20071123-20071124,p.p. 2900-2904。
  39. 郭裕竹、李志偉、張麗君、陳永逸、王朝正、黃仁清,2007,”以液態原子力顯微鏡即時觀察合金薄膜剝除行為之研究”, 96年度防蝕工程年會暨學術研討會, J1-1~J1-6, 2007/8/30-8/31.
  40. 黃仁清、詹益峰、陳銘震, 2007, ”電解液配方對純銅電解拋光平坦化之影響”,第十一屆奈米工程暨微系統技術研討會, D2-3-1~ D2-3-4,20070830-0831 (國立中興大學,台中)。
  41. 李志偉,黃仁清,李朝聖,張永鵬,康淵,2006, ”單晶銅於奈米壓入之不連續應變現象”, 中華民國力學學會第三十屆全國力學會議, ctam30-58,大葉大學,台灣。
  42. 李志偉,黃仁清,李朝聖,張永鵬,康淵,2006, ”單晶銅奈米壓入硬度及彈性模數因表面凸起之影響及修正計算”,中華民國力學學會第三十屆全國力學會議, ctam 30-57,大葉大學,台灣。
  43. 翁永進,張秉書,李志偉,黃仁清, 2005,”奈米壓痕技術及其應用”,大葉大學奈米技術與材料研討會,Poster 1-1- Poster 1-8。
  44. 巫維標、黃仁清, 2005,“超大型平面元件之銑削路徑與銑削參數對真平度影響之探討”,中國機械工程學會第二十二屆全國學術研討會,p318。
  45. 黃仁清、巫維標,2005, “應用巨指令於平板凸輪加工與線上測量之研究”,中國機械工程學會第二十二屆全國學術研討會,p333。
  46. 黃仁清、李志偉,2005,”以電化學原子力顯微鏡進行純銅之奈米加工與腐蝕現象之即時觀察研究”,中國機械工程學會第二十二屆全國學術研討會, E2-039。
  47. 黃仁清,黃宗隆,江柏韋,陳銘震,王建智,張家霖,2005,”應用原子力顯微鏡於奈米圖案雕刻之研究”,第九屆奈米工程暨微系統技術研討會,p98。
  48. 李志偉、江景昇、黃仁清、王朝正,2005,”以原子力顯微鏡進行銅合金腐蝕現象之即時觀察研究”,九十四年度防蝕工程年會暨學術研討會. 第720~729頁。
  49. 黃仁清、李志修,”2004,RV-M1機械人量測應用之研究”,東南技術學院九十二學年度教師研究成果發表會論文集,pp.160~172。93.10.8
  50. 林榮慶、黃仁清、趙彥傑,2004,”奈米級薄膜彎曲之研究”,第八屆奈米工程暨微系統技術研討會論文集,pp.129。
  51. 黃仁清、廖唯任,2004,”PC-base VB soft-PLC 控制系統之建構”,中國機械工程學會第二十一屆全國學術研討會論文集,pp.1455~1460。
  52. 黃仁清、李志偉、蔡世鴻、許嘉倫、鄭云涵, 2004,”應用輕敲式AFM於SK3碳鋼在水中的即時微觀氧化現象探討”,中國機械工程學會第二十一屆全國學術研討會論文集,pp.5383 -5388。
  53. 李志偉、陳弘凱、陳芃孜、杜正恭、黃仁清,2004,”以電化學原子力顯微鏡進行420不銹鋼於氯化鈉水溶液之即時腐蝕行為研究”,第四屆海峽兩岸材料腐蝕與防護研討會,pp.145~154。
  54. 李志偉、黃仁清、杜正恭, 2003, "Nano mechanical properties evaluation of CrN thin film by nanoindentation techniques",第七屆奈米工程暨微系統技術研討會,.2003-1120-21-台大
  55. 巫維標、黃仁清, 2003,”CNC五面加工機側銑頭(RAH)尺寸誤差補正方法之研究” ,東南技術學院九十一年度研究成果發表暨技專校院發展學校重點特色專案計畫成果研討會, pp259 ~ 275.。
  56. 黃仁清、巫維標,2003 "應用巨指令於混合式鑽削型態之鑽孔NC程式之研究",東南技術學院九十一年度研究成果發表暨技專校院發展學校重點特色專案計畫成果研討會, pp276 ~ 285.
  57. 李志偉、黃仁清、杜正恭、陳乙誠、鄭智鴻,2003, "經滲鉻改質處理之鋼鐵材料機械性質評估",中華民國鍍膜科技研討會暨國科會計畫研究成果發表會。
  58. 林榮慶, 黃仁清, 陳振達, ”銅材料奈米級拉伸模式研究”, 中華民國第二十七屆全國力學年會暨全國力學會議論文集, 新興製造力學系列下冊, pp.954-961, 台灣, 台南, 2003. 台南市, Dec. 12 – 13.
  59. 林榮慶,黃仁清,2003年2月,”奈米級正交切削研究”,第三屆海峽兩岸製造技術研討會,pp.32-39。台灣台北.
  60. 黃仁清,巫維標,2002年6月,” 平板凸輪加工之參數化NC程式與發展系統之研究”,東南技術學院研究論文發表會論文集,pp171-183.
  61. 黃仁清,2000年6月,”應用光通訊器於AGV派車之研究”,製造科技領域技術論文研討會論文集,pp39-44. 清華大學.台灣.新竹.
  62. 黃仁清,2000年6月,”應用巨指令於平板凸輪加工之參數化NC程式研究”,製造科技領域技術論文研討會論文集,pp35-38.清華大學.台灣.新竹.
  63. 黃仁清,巫維標,2000年6月,”應用巨指令於兩段式進給率鑽孔加工之研究”,製造科技領域技術論文研討會論文集,pp31-34. 清華大學.台灣.新竹.
  64. 黃仁清,林榮慶 , 1996,11月, “夾持點選取與夾持穩固性分析”, 中國機械工程學會第十三屆學術研討會設計組論文集,pp571-578. 台灣大學.台灣台北.
 
論文評審
1.擔任國際期刊 Scanning 論文評審 
2.擔任國際期刊Journal of Polymer Engineering論文評審 
3.擔任國際期刊Surface and Coatings Technology論文評審 
4.擔任國際期刊Materials Science and Engineering B論文評審 
5.擔任國際期刊eXPRESS Polymer Letters 論文評審 
6.擔任2nd/2011 International symposium on Mechanical Science and Technology研討會論文評審 
7.擔任2011,International Conference on Applied Mechanics, Materials, and Manufacturing (ICA3M) 研討會論文評審